128_ EnglishConnecting/Dubbing with other devices (Recorder, PC, Printer, etc)
Symptom Explanation/Solution
You cannot dub correctly using the HDMI
cable. You cannot dub images using the HDMI cable.
You cannot dub correctly using the
Component/AV (Video, Audio L/R) cable.
The Component/AV (Video, Audio L/R) cable is not connected properly.
Make sure that the Component/AV (Video, Audio L/R) cable is connected to the
proper jack, i.e. to the input jack of the device used for dubbing images from your
camcorder. page 52
This HD camcorder provides the two-in-one component/AV cable that fits
the purpose of the component and the AV cable. Therefore, when using the
component/AV cable, you must check the right method for the TV output by
setting the “Analogue TV Out” menu. page 89
Printouts cannot be made using a
PictBridge printer.
Your printer may not print images edited on a computer or recorded using other
device. This is not an error.
Connecting to a computer
Symptom Explanation/Solution
The computer does not recognise your
HD camcorder.
Disconnect the USB cable from the computer and camcorder, restart the computer,
then connect it again correctly.
Cannot play a movie file properly on a
Windows computer.
A video codec is needed to play the file recorded on your HD camcorder.
Install or run the built-in edit software (Intelli-studio). pages 109-111
Make sure you insert the connector in the correct direction, and connect the USB
cable to the USB jack on your camcorder firmly.
Disconnect the cable from the computer and camcorder, restart the computer.
Connect it again properly.
To play back an HD video file, a computer with better specification is required.
Check a computer with recommended specification. page 106
Intelli-studio does not function properly.
Exit the Intelli-studio application, and restart the Windows computer.
The built-in software on your camcorder, Intelli-studio is not Macintosh compliant.
• Set PC Software” to “On” in the Settings menu. page 88
According to your computer type, the Intelli-studio program may not automatically
run. In this case, open the desired CD-ROM drive that has the Intelli-studio
programme in My Computer and run iStudio.exe.