12_ English
Installing the button type battery (CR2025) in the remote control
1. Turn the battery holder counter clockwise
(as indicated with () mark) using your fingernail
or a coin to open it.
• The battery holder opens.
2. Insert the battery into the battery holder with the
positive (+) terminal facing down and
press it firmly until you hear a locking sound.
3. Place the battery holder back in the remotece the battery holder back in the remotehe battery holder back in the remote
control, match its () mark with the () mark on
the remote control, and turn the battery holder
clockwise to lock it.
Precautions regarding the button type battery
• There is a danger of explosion if the button type battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Do not pick up the battery using tweezers or other metal tools. This will cause a short circuit.
• Do not recharge, disassemble, heat or immerse the battery in water, to avoid the risk of explosion.
WARNING
Keep the button type battery out of the reach of the children.
Should any battery be swallowed, consult a doctor immediately.
<Battery holder>