Connecting/Dubbing with other devices (Recorder, PC, Printer, etc)

Symptom

Explanation/Solution

 

 

You cannot dub correctly using the HDMI

• You cannot dub images using the HDMI cable.

cable.

 

 

 

 

• The Component/AV (Video, Audio L/R) cable is not connected properly.

 

Make sure that the Component/AV (Video, Audio L/R) cable is connected to the

You cannot dub correctly using the

proper jack, i.e. to the input jack of the device used for dubbing images from your

camcorder. ￿page 52

Component/AV (Video, Audio L/R) cable.

• This HD camcorder provides the two-in-one component/AV cable that fits

 

the purpose of the component and the AV cable. Therefore, when using the

 

component/AV cable, you must check the right method for the TV output by

 

setting the “Analogue TV Out” menu. ￿ page 89

 

 

Printouts cannot be made using a

• Your printer may not print images edited on a computer or recorded using other

PictBridge printer.

device. This is not an error.

 

 

Connecting to a computer

Symptom

Explanation/Solution

 

 

The computer does not recognise your

• Disconnect the USB cable from the computer and camcorder, restart the computer,

HD camcorder.

then connect it again correctly.

 

 

 

• A video codec is needed to play the file recorded on your HD camcorder.

 

Install or run the built-in edit software (Intelli-studio). ￿pages 109-111

Cannot play a movie file properly on a

• Make sure you insert the connector in the correct direction, and connect the USB

cable to the USB jack on your camcorder firmly.

Windows computer.

• Disconnect the cable from the computer and camcorder, restart the computer.

 

Connect it again properly.

 

• To play back an HD video file, a computer with better specification is required.

 

Check a computer with recommended specification. ￿page 106

 

 

 

• Exit the Intelli-studio application, and restart the Windows computer.

 

• The built-in software on your camcorder, Intelli-studio is not Macintosh compliant.

Intelli-studio does not function properly.

• Set “PC Software” to “On” in the Settings menu. ￿page 88

• According to your computer type, the Intelli-studio program may not automatically

 

 

run. In this case, open the desired CD-ROM drive that has the Intelli-studio

 

programme in My Computer and run iStudio.exe.

 

 

128_ English