Inserting/Ejecting the battery and memory card
16
Getting Started
Inserting/ejecting a memory card (not supplied)
To insert a memory card
1 Slide, and then open the memory card cover as shown in
the figure.
2 Insert the memory card into the card slot until it softly clicks.
• Make sure that the label portion of the card is facing up and the
camcorder is placed as shown in the figure.
3 Close the memory card cover.
To eject a memory card
1 Slide, and then open the memory card cover as shown in
the figure.
2 Gently push the memory card to eject it.
3 Close the memory card cover.
• To avoid the data loss, turn off the camcorder by pressing and holding the [Home ( )] button before inserting or ejecting the memory card.
• Be careful not to push the memory card too hard. The memory card may suddenly pop out.