Setting
HDMI AUDIO
You can set HDMI audio settings.
√ 
Before using!
• Press the INPUT MODE button to select HDMI1 or HDMI2. (see page 21)
• If you select Digital (Optical, Coaxial) or Analog, the HDMI audio setting will be deactivated.
1 Press SETUP/MENU button, and then press the ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2 Press 
button to select the “HDMI AUDIO”, and then press the ENTER button.
• “HDMI : AVR” appears on the display.
3 Press …† button to set the HDMI audio.
•Each time you press this button, HDMI : AVR ➝ HDMI : TV will be selected
in turn.
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button. “SETUP OFF” appears on the display and Setup Mode is exited.
Setting HDMI AUDIO•AVR : Audio is played on this product.
•TV : Audio is played on a TV connected to the HDMI OUT jack and no audio is played on this product.
• HDMI AUDIO setting is available only when the HDMI output is connected to a TV.
•If you do not hear sound from the TV, should change the HDMI audio output setting for your DVD PLAYER or SAT to PCM.
ENG
Setting
DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder.
√ 
1 Press SETUP/MENU button, and then press the ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2 Press | button to select the “DRC SETUP”, and |
| |
then press the ENTER button. |
| ||
• “DRC:STD” appears on the display. |
| ||
3 Press …† button to set the DRC. |
| ||
• Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN | OPERATION | ||
will be selected in turn. | |||
| |||
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button. “SETUP OFF” appears on the display and Setup Mode is exited.
Using the DRC button
Press DRC button.
• Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN will be selected in turn.
Setting DRC•STD : Sets DRC effect to standard.
•MAX : Sets DRC effect to maximum.
•MIN : Sets DRC effect to minimum.
24 | 25 |
