![Test tone](/images/new-backgrounds/22329/2232927x1.webp)
![To automatically output test tone](/images/new-backgrounds/22329/2232927xi2.webp)
Test
tone
Use the test tone check the speaker connection status or level.
To automatically output test tone
√
1 Press SETUP/MENU button, and then press the ENTER button.
•“SETUP MODE” appears on the display and the unit goes into Setup Mode.
2 Press button to select the
• Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W .
• During test signal output, press …† button to adjust the individual speaker output level from
To stop test tone
•Press SETUP/MENU button once time.
“SETUP OFF” appears on the display and test tone stops.
Using the Test Tone button
Press TEST TONE button.
•Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W.
•During test tone output, press …† button to adjust the speaker output level from
ENG
OPERATION26 | 27 |