Setting Dolby Pro Logic llx effect
Setting NEO:6 mode
ENG
This function works only in Dolby PRO LOGIC IIx MUSIC Mode.
1 Press SETUP/MENU button, and then press the ENTER button.
•“SETUP MODE” appears on the display and goes into Setup Mode.
2 Press button to select the “ MODE”, and then press the ENTER button.
3 Press button.
• Each time you press this button,
4 Press …† button to set the Dolby Pro Logic llx effect you want.
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button. “SETUP OFF” appears on the display and Setup Mode is exited.
Using the EFFECT button
1 Press MODE button to select ‘MUSIC’ Mode.
2 Press EFFECT button.
•Each time you press this button,
will be selected in turn.
3 Press …† button to select Dolby Pro Logic IIx effect you want.
•
• DIMENSION : You can set from
• PANORAMA : You can set it ON or OFF.
Dolby Pro Logic llx effect
•
•DIMENSION : Incrementally adjusts the sound field (DSP)from the front or surround.
•PANORAMA : This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.
You can play back 2 channel sound over 6.1 channels when enjoying music or a movie.
REMOTE CONTROL
Press NEO:6 MODE button.
•Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
MAIN UNIT
1 Press SURROUND button briefly to select “NEO:6” mode.
• Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO will be selected in turn.
2 Press SELECT( | , | ) button. |
| |
• Each time you press this button, MUSIC ➝ CINEMA will be selected in turn. |
| |||
|
| |||
To set the height of the center sound image |
| |||
|
|
|
|
|
If your TV (or screen) is installed high on a wall, you can raise the center | OPERATION | |||
2 Press | button to select the “NEO:6 MODE”, and then | |||
sound image of the front and center speakers to compensate. |
|
1 Press SETUP/MENU button, and then press the ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
press the ENTER button.
• “CEN
3 Press …† button to set the sound image you want.
• You can set the sound image from 0 to 5.
• This parameter adjusts the height of the center image through the front and center speakers. “0” is the lowest while “5” is the highest.
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button. “SETUP OFF” appears on the display and Setup Mode is exited.
NEO : 6 Mode
This mode decodes 2 channel signals to a high precision digital matrix decoder. for 6.1 channel sound.
•MUSIC : NEO:6 MUSIC mode is optimized for music playback
•CINEMA : NEO:6 CINEMA mode is optimized for movie playback.
• NEO:6 mode cannot be used with DTS and Dolby Digital multi channel signals.
•Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
30 | 31 |