Setup
Display
You can configure various display options such as the TV Aspect, Resolution, etc.
TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting.
•4:3 Pan-Scan
Select when you want to see the 16:9 video supplied by the DVD without the black bars on top and bottom, even though you have a TV with a 4:3 ratio screen(extreme left and right portion of the movie picture will be cut off).
•4:3 Letter Box
Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
•16:9 Wide
You can view the full 16:9 picture on your widescreen TV.
✎NOTE
If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
Since DVD discs are recorded in various image formats, they will look different depending on the software, the type of TV, and the TV aspect ratio setting.
Audio
Speaker Setting
Speaker Size
You can set the Speaker Size of the Center and Rear Speakers, as well as Test Tone in this mode.
Settings |
|
|
|
Speaker Setting |
|
|
|
Speaker Size |
|
| ► |
Sound Edit |
|
|
|
Delay Time |
|
|
|
Test Tone | : | Off |
|
Select |
| Return | |
Move | Select | Return | |
•For the Front speakers, the mode is set to Small.
•For the Subwoofer, the mode is set to Present.
•For the Centre and Rear speakers, you can switch the mode to Small or None.
-Small : Select this when using the speakers.
-None : Select this when no speaker is connected.
✎NOTE
The speaker mode may vary depending on the Dolby Pro Logic and Stereo settings.
Sound Edit
You can adjust the balance and level for each speaker.
Settings | Sound Edit |
|
|
|
|
| |
Front Bal. | dB L | R | dB |
Rear Bal. | dB L | R | dB |
Center Level |
|
| dB |
Rear Level |
|
| dB |
SW Level |
|
| dB |
| Change | Select | Return |
| Move | Select | Return |
Press the ▲▼ buttons to select and adjust the desired speaker.
Press the ◄► buttons to adjust the settings.
