Samsung HT-C350/MEA, HT-C350/KE Setting up the Speaker Delay Time, Setting the Centre Speaker

Adjusting Front/Rear Speaker Balance

You can select between 0 and -6.

The volume decreases as you move closer to –6.

Adjusting Centre/Rear/Subwoofer Speaker Level

The volume level can be adjusted in steps from +6dB to –6dB.

The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Centre and Rear speakers. You can also set the Test Tone in this mode.

Ideal Centre

Speaker placement

Ideal Rear

Speaker placement

Place all speakers within this circle.

Df: The distance from Front Speaker

Dc: The distance from Centre Speaker

Dr: The distance from Rear Speaker

03 Setup

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.

Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Rear Speakers.

Settings

Delay Time
	Front
	Center	: 00mSEC
	Rear	: 10mSEC
	Subwoofer
	Test Tone	: Off
Change		Select	Return
	Move	Select		Return

✎NOTE

The Delay Time menu will be activated only when the 5.1 channel source is played.

You can not set Centre and Rear in this mode when their Speaker Size is set to None.

Setting the Centre Speaker

If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance	0.00m	0.34m	0.68m	1.06m	1.40m	1.76m
between
Df and Dc
Delay	00 ms	01 ms	02 ms	03 ms	04 ms	05 ms
Time

Setting the Rear Speaker

If the distance of Dc is equal to or longer than the distance of Dr in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance	0.00m	1.06m	2.11m	3.16m	3.62m	5.29m
between
Dr and Dc
Delay	00 ms	03 ms	06 ms	09 ms	12 ms	15 ms
Time

✎NOTE

With PL II (Dolby Pro Logic II), the delay time may be different for each mode.

With AC-3, the delay time can be set between 00 and 15mSEC.

The Centre channel is only adjustable on 5.1 channel discs.

English 23

HT-C330-EUR_ENG-0607.indd 23 2010-06-07 ￿￿ 11:28:53