Samsung HT-C5200 Dynamic Range Control, AV Sync, Initial Settings Internet@TV Screen Size

Dynamic Range Control

You can listen at low volumes but still hear dialog clearly. This is only active when a Dolby Digital signal is detected.

•Off : You can enjoy the movie with the standard Dynamic Range.

•On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

AV Sync

Video may look slower than the audio when the product is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.

•You can set the audio delay time between 0 msec and 300 msec. Set it to the optimal status.

System

Initial Settings

By using the Initial Settings, you can set language, TV aspect and Network setting, etc. For more information on the settings, refer to the corresponding section in this user manual.

Internet@TV Screen Size

Set the Internet@TV Screen to the optimal size.

•Size 1 : Display smaller application icons, you may see some black on sides of screen.

•Size 2 : Display normal application icons, image may be too large for your TV screen.

•Size 3 : Display larger application icons, image may be too large for your TV screen.

Anynet+(HDMI-CEC)

Anynet+ is a convenient function that offers linked operations with other Samsung products with the Anynet+ feature.

To operate this function, connect this product to a Samsung TV with an HDMI cable.

You can operate this product using a Samsung TV remote control and start disc playback simply by pressing the PLAY (►) button on the TV’s remote control.

For more information, please see the TV user manual.

•Off : Anynet+ function will not work.

•On : Anynet+ functions will work.

✎NOTE

This function is not available if the HDMI cable does not support CEC.

If your Samsung TV has an nlogo, then it supports the Anynet+ function.

Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user manual of your TV.

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the product.

BD Data Management

Enables you to manage the downloaded contents from the Blu-ray disc that supports the BD-LIVE service.

You can check the device information including the storage size, and delete the BD data or change the device.

*You must have a minimum 1GB USB Memory device inserted in one of the USB slots (The Wireless LAN Jack also functions as a USB slot.) in order to download content from BD-LIVE.

Settings

Display	BDOnData-ScreenManagementMenu :
Audio		Disc Menu		:
	Current Device		: External Flash Memory
System	Total Size	Audio	: 955MB	:
Network		Subtitle		:
			: 949MB
	Available Size
Language Delete BD Data
Security	Change Device		: External Flash Memory
General
Support		sSelect		rReturn

03 Setup

English 33