Samsung HT-C6500/XEF Dynamic Range Control, AV Sync, Initial Settings, Internet@TV Screen Size

Dynamic Range Control

You can listen at low volumes but still hear dialog clearly. This is only active when a Dolby Digital signal is detected.

•Off : You can enjoy the movie with the standard Dynamic Range.

•On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

AV Sync

Video may look slower than the audio when the product is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.

•You can set the audio delay time between 0 msec and 300 msec. Set it to the optimal status.

System

Initial Settings

By using the Initial Settings, you can set language, TV aspect, Musical Auto Calibration and Network setting, etc.

For more information on the settings, refer to the corresponding section in this user manual.

Internet@TV Screen Size

Set the Internet@TV Screen to the optimal size.

•Size 1 : Display smaller application icons, you may see some black on sides of screen.

•Size 2 : Display normal application icons, image may be too large for your TV screen.

•Size 3 : Display larger application icons, image may be too large for your TV screen.

Anynet+(HDMI-CEC)

Anynet+ is a convenient function that offers linked operations with other Samsung products with the Anynet+ feature.

To operate this function, connect this product to a Samsung TV with an HDMI cable.

You can operate this product using a Samsung TV remote control and start disc playback simply by pressing the PLAY (►) button on the TV’s remote control.

For more information, please see the TV user manual.

•Off : Anynet+ function will not work.

•On : Anynet+ functions will work.

✎NOTE

This function is not available if the HDMI cable does not support CEC.

If your Samsung TV has an nlogo, then it supports the Anynet+ function.

Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user manual of your TV.

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the product.

BD Data Management

Enables you to manage the downloaded contents from a Blu-ray Disc that supports the BD-LIVE service.

You can check the device information including the storage size, delete the BD data or change the Flash memory device. Change Device allows you to select either the product's Internal Memory or External Memory (connected USB Device). If the data to be stored from BD-LIVE is greater than the size of the remaining memory or the Internal Memory is full, connect an External USB device, then select External Device in the menu.

Settings

Display	BDOnData-ScreenManagementMenu :
Audio	Disc Menu		:
	Current Device	: Internal Flash Memory
System	Total Size Audio	: 703MB	:
Network	Subtitle	: 703MB	:
	Available Size
Language Delete BD Data
Security	Change Device	: Internal Flash Memory
General
Support	" Select		' Return

Delete all BD data in the storage.

English 35

03 Setup

HT-C6500_ELS_0203.indd 35 2010-02-03 ￿￿ 11:14:31