Samsung HT-C6730W/XEF, HT-C6730W/EDC manual Setting Up the Wireless Network Connection Manual

Setup

Settings

Display	Network Settings
Audio	Network Selection
System	Connecting to network.
Network	Network Name(SSID) : shj
Language
Security	Stop
General
	" Select ' Return
Support

5.In the list of networks, press the ▲▼ buttons to select a network, and then press the ENTER button.

6.If the PIN/Security pop-up appears, go to Step 7. If the Network Connecting Screen appears, go to Step 11.

7.Press the ▲▼ buttons to select PIN or Security.

For most home networks, you would select Security (for Security Key).

8.On the Security screen, enter your network’s Pass Phrase.

✎NOTE

 You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem.

9. To enter the Pass Phrase, follow these general directions:

• Press the number keys on your remote to enter numbers.

• Use the arrow keys on your remote to move from button to button on the Security Key screen.

• To enter letters, move to the button labelled a/A/1/, and then press the ENTER button. Each time you press the ENTER button, you change the kind of characters you can enter (a/A/1/).

• To enter a letter, press the number button that corresponds to the letter. Pressing the button repeatedly changes the letter.

• To delete the last letter or number you entered, move to the Delete button, and then press the ENTER button.

• To clear all entered letters and numbers, move to the Clear key, and then press the ENTER button. You can also just press the RED(A) button on your remote.

40 English

10.When done, press the YELLOW(C) button on your remote, or move to the Done button, and then press the ENTER button. The Network Connecting screen appears.

11.Wait until the connection confirmation message is displayed, and then press the ENTER button. The Network Settings screen reappears.

12.To test the connection, press the ▼ button to select Network Test, and then press the ENTER button.

Setting Up the Wireless Network Connection - Manual

If the Auto Setting does not work, you need to enter the Network settng values manually.

To get the Network setting values from most Windows computers, follow these steps:

1.Right click the Network icon on the bottom right of the screen.

2.In the pop-up menu, click Status.

3.On the dialog that appears, click the Support tab.

4.On the Support tab, click the Details button. The Network settings are displayed.

To Enter the Network settings into your product, follow these steps:

1.On the Internet Protocol Setup screen, press the ENTER button.

2.Press the ▲▼ buttons to select Manual, and then press the ENTER button.

3.Press the ▼ button to go to the first entry field (IP Address).

4.Use the number buttons to enter numbers.

Settings

			Network Settings
Display			On-Screen Menu					:
Access Point Selection				: Not Selected
Audio			Disc Menu					:
Internet Protocol Setup				: Manual
System			Audio					:
Network		IP Address	Subtitle:			0	0	:0	0
Language Subnet Mask				:	255		255	255	0
Security		Gateway		:		0	0	0	0
GeneralDNS				: Manual
Support		DNS Server		:		0	0	0	0
	a PBC (WPS)		> Move			" Select		' Return