Getting Started
3.Fit the stand pole into the cable hole of the stand base and fix it with 3 large black screws(4x16).
4.Cover the top of the stand base with the
5.Fit the stand pole bracket into the rear hole of the product and fix it with 2 siver screws(4x6).
-Arrange the cables through the cable hole of the stand pole lest that any of them should protrude.
6.Insert the pole holder into the stand pole top down as shown.
3 |
Bottom |
(Stand Base) |
4 |
Deco-stand Rear
5 |
6 |
7.This is when the product has been installed properly on the Tallboy type of stand.
20 English
7
