Connections

3.Fit the speaker in a height adjusting hole of your choice. For the height information, check the following examples. (570mm for the default height)

Ex) Hole 1: 650mm in the speaker height Hole 2: 635mm in the speaker height

4.Close the cover as shown and tighten back the 3 screws.

5.This is after the height of the speaker is adjusted. You can repeat these steps above at any time if you want to readjust the height.

3

4

Hole 1

Hole 2

5

Connecting The Speakers

1.Press down the terminal tab on the back of the speaker.

2. Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab.

3.Connect the connecting plugs to the back of the product by matching the

colours of the speaker plugs to the speaker jacks.

Black

Red

Front Speaker (R)

Front Speaker (L)

Subwoofer

16 English

HT-D423H-XU-ENG-1228.indd 16

2011-12-28 ￿￿ 4:17:52