![](/images/backgrounds/346448/346448-015x1.png)
Speaker Components |
| Assembled Speakers |
(L)(R)
SCREW (3.5×15): 6EA
SPEAKER CABLE | |
|
FRONT
FRONT SPEAKER | SUBWOOFER |
STAND BASE | SUBWOOFER |
Connections 02
Installing the Speakers on the Half Tallboy Stand
1.Stretch out the speaker cables as shown and arrange it through the hole of the stand base.
2.When done, use the screw driver to tighten the screw
(C) in each of 3 screw holes as shown.
3.This is the appearance after the speaker is installed. Follow this steps to install other speaker.
1 | 2 |
3
Adjusting the height of the Half Tallboy Speaker
1. If you want to adjust the height of the speaker, | 1 | 2 | |
loosen 3 screws on the rear of the speaker base | |||
|
| ||
first. |
|
|
2. Pull up the speaker in the arrow direction. (See figure 2)
! CAUTION : Be careful as an excessive force may result in a physical damage.
English 15