Basic Functions
Listening to Radio
Using buttons on the Remote Control
1.Press the FUNCTION button to select FM.
2.Tune in to the desired station.
~Preset Tuning 1 : You must first add a desired frequency as a preset. Press the STOP (@) button to select PRESET and then press the TUNING/CH (
) button to select the preset station.
~Manual Tuning : Press the STOP (@) button to select MANUAL and then press the TUNING/CH
(
) button to tune in to a lower or higher frequency.
~Automatic Tuning : Press the STOP (@) button to select MANUAL and then press and hold the TUNING/CH (
) button to automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
~ Each time the button is pressed, the sound switches between STEREO and MONO.
~In a poor reception area, select MONO for a clear,
Presetting Stations
Example : Presetting FM 89.10 in the memory
1.Press the FUNCTION button to select FM.
2.Press the TUNING/CH (
) button to select
<89.10>.
3. Press the TUNER MEMORY button. ~ Number flashes on the display.
4. Press the 
buttons to select preset number.
~You can select between 1 and 15 presets.
5.Press the TUNER MEMORY button again.
~Press the TUNER MEMORY button before number disappears from the display.
~Number disappears from the display and the station is stored in memory.
6.To preset another station, repeat steps 2 to 5.
~To tune in to a preset station, press the TUNING/CH (
) buttons on the remote control to select a channel.
