Samsung HT-D6500/XE, HT-D6500/XN Contact Samsung, By Disc, Via download, Download in Standby Mode

Setup

By Disc

To upgrade by Disc, follow these steps:

1.Visit www.samsung.com/bluraysupport.

2.Download the latest disc software upgrade zip archive to your computer.

3.Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.

4.Write the folder onto a disc. We recommend a CD-R or DVD-R.

5.Finalise the disc before you remove it from your computer.

6.Insert the disc into product.

7.In the product’s menu, go to Settings > Support > Software upgrade.

8.Select By Disc.

✎NOTE

When the system upgrade is done, check the software details in the software Upgrade menu.

Do not turn off the product during the Software Upgrade. It may cause the product malfunction.

Via download

The Via download option lets you upgrade using a file the product downloaded earlier but you decided not to install immediately or a file downloaded by the product in Standby Mode (See Download in Standby Mode below).

To upgrade Via download, follow these steps:

1.If upgrade software has been downloaded, you will see the software version number to the right of Via download.

2.Select Via download, and then press the ENTER button.

3.The product displays a message asking if you want to upgrade. Select Yes. The product begins the upgrade.

4.When the update is complete, the product turns off automatically, and then turns on.

44 English

✎NOTE

When the system upgrade is done, check the software details in the software Upgrade menu.

Do not turn off the product during the software Upgrade. It may cause the product to malfunction.

To use the Via download function, your product must be connected to the Internet.

Download in Standby Mode

You can set the Download in Standby Mode function so that the product downloads new upgrade software when it is in Standby mode. In Standby mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it.

To set Download in Standby Mode, follow these steps:

1.Press the ▲▼ buttons to select Download in Standby Mode, and then press the ENTER button.

2.Select On or Off.

•Off : If you select Off, the product will notify you with a pop up message when new upgrade software is available.

•On : If you select On, the product will automatically download new upgrade software when it is in Standby mode with the power off. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on.

✎NOTE

To use the Download in Standby Mode function, your product must be connected to the Internet.

Contact Samsung

Provides contact information for assistance with your product.

HT-D6500_ELS_1226.indd 44 2011-12-26 ￿￿ 3:22:26