![](/images/backgrounds/352896/352896-060x1.png)
Basic Functions
How to Link the Wireless Transmitterwith the Main Unit1.Turn off your Home Cinema.2.Press the 4, 7, 6, 3 buttons on the remote control in order.•The Power LED blinks once.3.Connect the iPod/iPhone to the Wireless transmitter.L
INK
STANDBY
CHARGE
4.Turn on the iPod/iPhone. Press the "ID SET" button on the back of the Wireless transmitter for 5 seconds. The link light on the wireless transmitter blinks rapidly.
5.Turn on your product.•To listen to music from iPod/iPhone over theproduct, press the![](/images/backgrounds/352896/352896-060xi2.png)
![](/images/backgrounds/352896/352896-060xi3.png)
![](/images/backgrounds/352896/352896-060xi4.png)
•After you select "W. IPOD" mode, turn the volume of the product down to avoid hearing damage.
•You can control the speaker volume of iPod/ iPhone with a volume wheel or a volume bar.
•When iPod/iPhone is stopped or in a power saving mode, the Wireless transmitter enters Sleep Mode.
When iPod/iPhone is set to Deep SleepMode, the Wireless transmitter turns off.LINK |
|
| |
| STANDBY |
| |
| LINK |
| |
| STANDBY |
| |
| CH |
| |
| ARGE |
| |
| Function | ||
Display | LINK | STANDBY | |
| |||
| (Blue LED) | (Red LED) | |
| Pairing |
| |
LED ON | successfully | STANDBY | |
| completed |
| |
LED BLINK | Processing iPod/ | LOW BATTERY | |
(Long blink) | iPhone | ||
| |||
LED BLINK | Processing | Pairing failed | |
(Short blink) | pairing | ||
|
!CAUTION
If you use the main unit near a wireless device such as a laptop computer, an AP, or Wifi, an unstable operation error can occur.
Do not pair the
The transmission distance from the product to the wireless transmitter is about 5 meters, but may vary depending on your operation environment.
The audio signal may be weakened or even lost where there is an obstacle such as a wall or partition between the product and wireless transmitter. You can also weaken or lose signal
if you move the wireless transmitter around.