Samsung HT-D6759W/ZG Speaker Components, Installing the Speakers on the Tallboy Stand, SWA-5000

Connections

Speaker Components

(L) (R)

SWA-5000

STAND SUBWOOFER

FRONT/FRONT TOP

TX Card

CENTRE	Wireless Receiver Module	Speaker Cable (2EA)
SCREW (4x20): 16EA
(L) (R)

SCREW (5x15): 8EA

SPEAKER CABLE

SURROUND STAND BASE

Installing the Speakers on the Tallboy Stand

1.Turn the Stand Base upside-down and connect it to the Stand.

2.Insert small screws (4x20, For connecting Stand & Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.

!CAUTION

When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm)

3.Insert the large screw (5x15, For connecting Stand & Stand Base) clockwise into the hole on the rear of the stand using a screwdriver.

4.Connect the upper Speaker to the assembled Stand.

5.Insert another large screw (5x15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

6.This is the appearance after the speaker is installed.

Follow this steps to install other speaker.

18 English

1	2
	Stand Base
	Stand
3	4
	Speaker
	Stand

5 6

or

HT-D6759W_ZG_0323.indd 18 2011-03-23 ￿￿ 10:02:44