Setting the Delay Time

Press Cursor button
1 Press MENU button. 2to move to ‘Audio’ and then press ENTER

button.

Press Cursor button
3to move to ‘DELAY TIME’ and then press ENTER button.

Press Cursor , ,

, buttons to move 4 to the desired

speaker and then press ENTER button.

Press Cursor , 5 totime.set the Delay

You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC.

SETUP

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers.

43

Setting CENTER SPEAKER

If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between Df and Dc

Delay Time

 

 

50

1.3 ms

100

2.6 ms

150

3.9 ms

200

5.3 ms

 

 

Setting REAR (SURROUND) SPEAKERS

If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between Ds and Dc

Delay Time

 

 

200

5.3 ms

400

10.6 ms

600

15.9 ms

 

 

Ideal CENTER

SPEAKER placement

Ideal

SURROUND SPEAKER placement

It is desirable to place all speakers within this circle.

Df: The distance from FRONT SPEAKER

Dc: The distance from CENTER SPEAKER44

Ds: The distance from SURROUND SPEAKER