Samsung HTDM150RH/EDC, HT-DM150, HTDM150RH/ELS Listening to Radio, Presetting Stations, Main Unit

Listening to Radio

You can listen to the chosen band (FM, MW, LW broadcast stations) by using either the automatic or manual tuning operation.

	Remote Control Unit
1		Press TUNER/	2	Tune in to the
		BAND button.		desired station.

Presetting Stations

You can store up to:

15	FM stations	• FM	Frequency Modulation
8 MW stations		• AM(MW)	Medium Wave
7	LW stations	• LW	Long Wave

Example: Presetting FM 89.1 in the memory

Press the
TUNER(BAND)	Press	to	Press the TUNER
1button and select	2 select "89.10".		3 MEMORY button.

•The selection toggles back and forth between "FM ➝ MW ➝ LW" each time the TUNER(BAND) button is pressed.

Automatic Tuning 1

Automatic Tuning 2

Manual Tuning

When is pressed, a preset broadcast station is selected.

Press and hold to automatically search for active broadcasting stations.

Briefly press to increase or decrease the frequency incrementally.

• Each time the button is pressed,	• Refer to Step 2 on page 55 to	• “PROGRAM” flashes in the
the band switches between	automatically or manually tune in	display.
"FM ➝ MW ➝ LW".	to a station.
MHZ	MHZ	PROGRAM	MHZ
	TUNED

kHz

Main Unit

Press the Function

1button to select the desired band (FM, MW, LW).

2 Select a broadcast station.

Automatic Tuning 1 Press the STOP ( )

button to select

PRESET and then press button to select the preset station.

Automatic Tuning 2 Press the STOP ( ) button

to select "MANUAL" and

then press and hold button to automatically search the band.

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

press to tune in to a lower or higher frequency.

4 Press to select preset number.

•You can select between 1 and 15.

PROGRAMMHZ

5	Press the TUNER	6	To preset another
			station, repeat
	MEMORY button.
			steps 2 to 5.

•Press the TUNER MEMORY button before ‘PROGRAM’ disappears from the display.

•‘PROGRAM’ disappears from the display and the station is stored in memory.

MHZ

RADIO OPERATION

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

55	•	Each time the button is pressed, the sound switches between "STEREO" and "MONO".
	•	In a poor reception area, select MONO for a clear, interference-free broadcast.

To tune in to a preset station, press on the remote control to select a channel.

56