Zanussi ZOU 461 Electronic programmer, Setting the time of day, To set the correct time of day

This procedure should be repeated with the Grill function for approximately 5-10 minutes.

Then let the oven cool down. Then dampen a soft cloth with warm water and a little mild washing-up liquid and use this to clean the oven cavity.

Before using for the first time, carefully wash the oven accessories as well.

To open the oven door, always hold the handle in the centre.

Electronic programmer

	4
5		7
6			8

2 1 3

The oven will only work if the time of day has been set.

However, the oven can also be operated without any programme.

In the event of a power failure, all the settings (time of day, programme setting or programme in operation) will be cancelled. When the power is restored, the numbers in the display will flash, and the clock/timer has to be reset.

Setting the time of day

When the power supply is switched on, or after a

power failure, the “Time of day” pilot lamp	will flash on
the display.

To set the correct time of day:

1.Press button “ ” or “ ”.

2.After the setting is carried out, wait for 5 seconds: the

“Time of day” pilot lamp will go out and the display

will show the set time. The appliance is ready for use.

To reset the correct time of day:

1.Press button repeatedly to select the “Time of day” function. The relevant pilot lamp will start flashing. Then proceed as described above.

The time of day can only be reset if no automatic

function (cooking duration	or end of cooking
) has been set.

1. Push button for selecting a function

2. Decreasing control button “ ”

3.Increasing control button “”

4.Display

5.“Cooking Duration” pilot lamp

6.“End of cooking” pilot lamp

7.“Minute minder” pilot lamp

8.“Time of day” pilot lamp

26