Zanussi ZOU 461 Technical data, Instructions for the Installer, Heating element ratings, Oven

Technical data

Heating element ratings

Bottom heating element	1000 W
Top Heating element	800 W
Full oven (Top+Bottom)	1800 W
Fan cooking	2000 W
Grill	1650 W
Oven light	25 W
Hot air fan motor	25 W
Cooling fan motor	25 W
Total rating	2075 W
Operating voltage (50 Hz)	230 V

Dimensions of the recess

Height	mm 600
Width	mm 560
Depth	mm 550
Oven
Height	mm 335
Width	mm 395
Depth	mm 400
Oven capacity	53 l

Instructions for the Installer

This appliance can be connected to the below listed ceramic hobs:

Type: ZVD 868
(with 2 double-circuit cooking zones)
Maximum power absorbed:	7,6 kW
Power supply voltage	(50 Hz) 230 V
Type: ZK 630 L - ZK 630 F
(with 2 double-circuit cooking zones)
Maximum power absorbed	7,6 kW
Power supply voltage	(50 Hz) 230 V
Type: ZC 6695
(with 1 double-circuit cooking zone)
Maximum power absorbed	6,4 kW
Power supply voltage	(50 Hz) 230 V

Type: ZC 6675

(without double-circuit cooking zone)

Maximum power absorbed	5,8 kW
Power supply voltage	(50 Hz) 230 V
Maximum Total Power Rate
Oven + ceramic hob	9,675 kW

The instructions given below are designed specifically for a qualified installer and should aid him or her to perform all installation, adjustment, and maintenance operations with absolute precision and in compliance with all current legislation and regulations. We strongly recommend that all operations for the installation of your cooker be carryed out by Qualified Personnel in accordance with existing rules and regulations.

Electrical connection

Priortomakingtheelectricalconnection,makesurethat:

—the protection fuse and the domestic wiring system are suitable to carry the total electric load of the oven (see rating plate);

—your domestic wiring system has an efficient earth connection in compliance with rules and laws in force;

—the wall socket or the omnipole switch used for the electrical connection can easily be reached after the oven is built in.

This appliance is delivered without an electric supply cable, therefore, you will have to fit to it a supply cable with standard plug,suitableforthetotalelectricloadshownontheratingplate. The plug is to be inserted into a suitable wall socket. If you requireadirectconnectiontotheelectricnetwork(mains),itwill be necessary to fit between the appliance and the mains an omnipole switch, with a minimum gap between contacts of 3 mm,suitablefortherequiredloadandincompliancewithrules inforce.Thegreen&yellowgroundwiremustnotbeinterrupted bytheswitch,andshouldbe2-3cmlongerthanthephaseand neutral wires. The supply cable must in all cases be laid out in such a way as to ensure that it does not reach at any given pointatemperature50°Chigherthantheambienttemperature. Suitable power supply cables are the following types, consideringtherespectivenecessarysectionofcable:H07RN- F, H05 RN-F, H05 RR-F, H05 VV-F, H05 V2V2-F (T90), H05 BB-F.

37