Zanussi ZOU 461 Building-in, Connecting the terminal board, Electrical connection with the hob

Connecting the terminal board

Theapplianceincorporatesaneasilyaccessible6-poleterminal boardwhosejumpers(bridges)arealreadypre-setforoperation on 400 V tri-phase with neutral wire (Fig. 8). In case a different mainsvoltageispresent,thejumpersontheterminalboardmust be rearranged as shown in the diagram (Fig. 9). The ground

cablemustbeconnectedtoterminal .Afterconnectingthe

supply cable to the terminal board, secure it with a junction clamp.

Electrical connection with the hob

This oven can be connected to hobs indicated in the paragraph "Technical data". The socket for connecting the hob is located at the top of the oven cabinet. The hobs come complete with connecting leads for the hot plates/ heat areas and ground cable; these leads feature plug-in connectors. Connection of the hob to the oven is carried out by plugging-in these connectors to the corresponding oven socket.

The plug-to-socket connection design is such as to prevent possible wrong plugging-ins.

The Manufacturer disclaims any liability in case these accident-preventing rules are not observed.

Building-in

							Fig. 8
1		2	3	4	5
	230V 3~
Ø 4x2,5mm² L1			L2		L3 PE
	1	2	3	4	5
	230V 1~
Ø 3x2,5mm² L1				N		PE
	1	2	3	4	5
	400V 2N~
Ø 4x2,5mm² L1 L2				N			PE
	1	2	3	4	5
	400V 3N~
							PE
Ø 5x1,5mm² L1 L2 L3 N

Fig. 9

To ensure correct operation of the built-in assembly, the kitchen cabinet and the recess for the built-in appliance must have suitable dimensions. When the appliance is fitted-in, there must be no open spaces left and it must be closed on all sides by the kitchen furniture to prevent the possibility of inadvertently touching “live” (current carrying) parts of the oven. All parts ensuring such a protection, including any covering panel (for instance, if the appliance is installed at the end or at the beginning of a kitchen counter) must be fastened in such a way as to prevent removal of the same without the aid of some tool. This appliance can be placed with its back and with one side close to appliances or walls of higher height. The other side, instead, must be placed close to furniture or appliances, having the same height.

Overall oven dimensions (Fig. 10)

Fig. 10

38