Connections

Speaker Components

HT-E350

(L)

(R)

(L)

(R)

FRONTSURROUNDCENTERSUBWOOFER

Speaker Components

Assembled Speakers

HT-E355

 

HT-E355

 

(L) (R)

SPEAKER CABLE

 

 

 

 

 

 

SCREW (5×15): 16EA

 

 

FRONT

STAND

CENTER SPEAKER

(L) (R)

CENTER

 

 

 

 

 

 

 

FRONT

SURROUND SUBWOOFER

SURROUND

STAND BASE SUBWOOFER

SPEAKER

SPEAKER

Installing the Speakers on the Tallboy Stand

*HT-E355 - Front/Surround Speakers

1.Turn the Stand Base upside-down and connect it to the Stand.

2.Insert three screws (5*15, For connecting Stand & Stand Base) clockwise into the three holes marked using a screwdriver as shown in the

illustration.

!!CAUTION : When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 7 kg.f.cm)

3.Straighten a supplied speaker wire and put in the hole on the centre of Stand Base.

4.Connect the upper Speaker to the assembled Stand.

5.Insert another large screw (5*15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

6.This is the appearance after the speaker is installed. Follow this steps to install other speaker.

1 Stand Base

2

Stand

34

Speaker

Stand

56

14 English