Samsung HT-E6750W/SQ Wireless Network, Connecting to a Network Router, Wired Network, Tkip/Aes

Connections

	Wireless Network
Connecting to a Network Router

You can connect your product to your network router using one of the methods illustrated below.

Wired Network

Wireless IP sharer

Or

NOTE

Broadband modem

(with integrated router)

Broadband service

Router

Broadband service

Broadband

modem

Broadband

service

NOTE

\ If your wireless IP router supports DHCP, this product can

use a DHCP or static IP address to connect to the wireless

network.

\ Set your wireless IP router to Infrastructure mode. Ad-hoc

mode is not supported.

\ The product supports only the following wireless security

key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK

(TKIP/AES)

\Internet access to Samsung’s Software Update server may not be allowed, depending on the router you use or your ISP’s policy. For more information, contact your ISP (Internet Service Provider).

\DSL users, please use a router to make a network connection.

\To use the AllShare Play function, you must connect your PC to your network as shown in the illustrations on the left.

The connection can be wired or wireless.

\ Select a channel on the wireless IP router that is not

currently being used. If the channel set for the wireless IP

router is currently being used by another device nearby, it

will result in interference and communication failure.

\ If you select the Pure High-throughput (Greenfield)

802.11n mode and set the Encryption type on your router

or AP to WEP, TKIP or TKIP-AES (WPS2Mixed), the product

will not support a connection in compliance with new Wi-

Fi certification specifications.

\ Wireless LAN, by its nature, may cause interference,

depending on the operating conditions (AP performance,

distance, obstacles, interference by other radio devices,

etc).

22 English