Samsung HT-E6750W/SQ manual Wi-Fi Direct, Then press the E button to accept

❏WPS(PBC)

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 32.

1 . Select Start in the Network Settings screen, and then press the E button.

Network Settings
Select your wireless router from the list.	1/10
iptime23	Refresh
ELT
	WPS(PBC)
JSY
	Previous
KT_WLAN_C361
	Next
Mirhenge_edu
	Cancel
SO070VOIP

2 . Select WPS(PBC), and then press the E button.

3 . Press the WPS(PBC) button on your router within two minutes. Your product automatically acquires all the network settings values it needs and connects to your network.

The Network Status screen appears. The product connects to the network after the network connection is verified.

Wi-Fi Direct

The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the product and each other using a peer-to-peer network, without a wireless router.

1 . Turn on the Wi-Fi direct device and activate its Wi-Fi Direct function.

2 . In the Home screen, select Settings, and then press the E button.

3 . Select Network, and then press the E button.

4 . Select Wi-Fi Direct, and then press the E button.

The Wi-Fi Direct devices that you can connect appear.

Wi-Fi Direct

Device Name : [HTS]E6750W

Select your Wi-Fi Direct device to connect to.

AndroidXXXXXXXDisconnected

Refresh

Close

mMove "Enter 'Return

5 . You have three ways to complete the Wi-Fi connection:

•Through the Wi-Fi device.

•Through the product using PBC.

•Through the product using a PIN.

Each is covered below.

Through the Wi-Fi Device

1 . On the Wi-Fi device, follow the procedure on the device for connecting to another Wi-Fi Direct device. See the device's user manual for instructions.

2 . When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK,

and then press the E button to accept.

3 . The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

Through the Product Using PBC

1 . Select the Wi-Fi Direct device you want to connect to this product, and then press the E button. The PBC/PIN pop up appears.

2 . Select PBC, and then press the E button. The PBC pop-up appears.

3 . Press the PBC button on the Wi-Fi Direct device within 2 minutes.

4 . The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

04 Settings

English 35