Samsung HT-ES6550W/TK manual Full

Settings

9 · If the connection is successful, the Connection Complete screen appears. Select Next, and then press the E button. The Software Update screen appears.

NOTE

If the connection is not successful, select Next, and then press the E button. After you have completed the Initial Settings procedure, go to "Wireless Network" on page 32 to set up the product's wireless network connection.

10 · To upgrade the software, select Update now, and then press the E button. To skip the upgrade, select Update later, press the E button, and go to Step 12.

NOTE

16:9 Full - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and expands 4:3 pictures to fill the 16:9 screen.

4:3 Letter Box - For older, standard screen Analog TVs. Displays 4:3 pictures in full screen and 16:9 pictures in letter box format that retains the 16:9 aspect ratio but puts black bars above and below the picture.

4:3 Pan-Scan - For older, standard screen Analog TVs. Displays 4:3 pictures in full screen and 16:9 pictures in Pan-Scan format that fills the screen, but cuts off the left and right sides of the picture and enlarges the middle vertically.

If you skipped network set up, you must skip Software Update also.

11 · If there is a Software Update available, the product downloads and installs the upgrade. This can take some time. If there is no Software Update available, the "There are no new software updates for you to download. You already have the most up to date version." message appears. Select Next, and then press the E button. The TV Aspect Ratio screen appears.

Initial Settings > Complete

Setup completed.

On-Screen Language	
Network Settings	
Software Upgrade	-
TV Aspect	

Press Smart Hub to enjoy a variety of Internet content.

Smart Hub

OK

Initial Settings > TV Aspect Ratio

Set to match the type of television connected.

16:9	Original
16:9	Full

4:3 Letter Box	Select when connecting to a	Previous
		Next
	16:9 TV Screen. All content will
4:3 Pan-Scan	be displayed at original aspect
	ratio. Content formatted in 4:3
	will be displayed with black
	bars on left and right.

12 · Using the ▲▼ buttons, select the Aspect Ratio that matches your screen, select Next, and then press the E button.

You have four choices:

16:9 Original - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and 4:3 pictures (the old, standard format) in 4:3 pillar box format with black bars on the left and right.

13 · The Setup completed screen appears. Check the settings to confirm they are correct. Select OK, and then press the E button. The Home screen appears.

NOTE

If you want to display the Initial Setting screen again and make changes, select the Reset option. (See page 30)

If you use an HDMI cable to connect the product to an Anynet+ (HDMI-CEC)-compliant Samsung TV and 1.) You have set the Anynet+ (HDMI-CEC) feature to ON in both the TV and the product and 2.) You have set the TV to a language supported by the product, the product will select that language as the preferred language automatically.

24 English

HT-ES6550W_TK_0824.indd 24 2012-08-24 오전 11:43:24