Samsung HT-F455/EN, HT-F455/TK Speaker Components, Installing the Speakers on the Tallboy Stand

Speaker Components

HT-F450
(L) (R)	(L) (R)
FRONT	SURROUND	CENTER	SUBWOOFER SPEAKER CABLE
HT-F453		HT-F455
(L) (R)		(L) (R)	(L) (R)

	(L)	(R)
	SURROUND
FRONT	STAND	FRONT	SURROUND	STAND

03 Connections

STAND BASE SCREW (5×20): 8EA

Installing the Speakers on the Tallboy Stand

*HT-F453 only - Front Speakers

*HT-F455 only - Front/Surround Speakers

1 . Turn the Stand Base upside-down and connect it to the Stand.

2 . Use the driver to combine the screws on the 3 marked holes.

CAUTION

\\ When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm)

3 . Straighten a supplied speaker wire to the gravity direction and put in the hole on the center of Stand Base.

4 . Connect the upper Speaker to the assembled Stand.

5 . Insert a screw clockwise into the hole on the rear of the speaker using a screwdriver. And then connect a speaker cable.

6 . This is the appearance after the speaker is installed.Follow this steps to install other speaker.

STAND BASE SCREW (5×20): 16EA

1 Stand Base 2

Stand

34

Speaker

Stand

56

English 11