Samsung HT-FS5200/ZF, HT-FS5200/XN, HT-F5200/XN, HT-F5200/EN, HT-FS5200/EN Playing Photo Contents

NOTES

The Home Cinema only supports Middle Quality SBC data (up to 237kbps@48kHz), and does not support High Quality SBC data (328kbps@44.1kHz).

The AVRCP feature is supported. It's functionality will differ, depending on the specifications of the connected device.

Connect only to a Bluetooth device that supports the A2DP Profile.

Only one Bluetooth device can be paired at a time. The search or connection functions may not work properly in the following cases:

-If there a strong electric field near or around the home cinema.

-If several Bluetooth devices are simultaneously paired with product.

-If the Bluetooth device is turned off, not in place, or malfunctions.

-Note that such devices as microwave ovens, wireless LAN adapters, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, and can cause electric interference.

To disconnect the Bluetooth device from the Home Cinema

You can disconnect the Bluetooth device from the Home Cinema. For instructions, refer to the Bluetooth device's manual.

•When the Home Cinema is disconnected from the Bluetooth device, the Home Cinema will display DISCONNECTED on the front display.

To disconnect the Home Cinema from the Bluetooth device

Press the ( ) button on the front panel of the Home Cinema to switch from BT to another mode or turn off the Home Cinema.

•Except when you disconnect the home cinema by changing functions, the connected Bluetooth device will wait a certain time for a response from the Home Cinema before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device.)

NOTES

In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Home Cinema System and the Bluetooth device exceeds 10 meters. When the Bluetooth device comes back into effective range or you restart the Bluetooth device, you have to pair the device and home cinema again to reconnect.

In Bluetooth mode, the screen saver will start if the Bluetooth device stays in the Ready state for 5 minutes. To reconnect the Bluetooth device, turn off the screen saver, and then connect the device. To turn off the Screen saver, press any button on the remote control (the Volume button, a number button, etc.)

Playing Photo Contents

You can play photo contents located on a DVD, USB, mobile device or PC.

Using the Tools Menu

During playback, press the TOOLS button.

Previous	Select to move to the previous
	picture.
Next	Select to move to the next picture.
Start / Stop	Select to play/pause the slide show.
Slide Show
Slideshow		Speed : Select to set a slide
		show's speed.
Settings	 Effect : Select to set a slide
		show's special effects.
Zoom	Select to enlarge the current
	picture. (Enlarge up to 4 times)
Rotate	Select to rotate the picture. (This will
	rotate the picture either clockwise
	or counter clockwise.)
Background	Select to listen to music while
Music	viewing a slide show.
		Picture Mode
		- Dynamic : Choose to increase
		Sharpness.
		- Standard : Choose for most
		viewing applications.
Settings		- Movie : This is the best setting
		for watching movies.
		- User : Lets you adjust the
		sharpness and noise reduction
		function respectively.
		Information : Shows the picture
		information.
Equaliser	Customize your own personal
	sound preferences using the
Mode	Equaliser settings.

05 Media Play

English 37