Samsung HT-J5500/EN manual Name, Buttons on your remote control, Select Then press the E button

Settings

Network Settings

4. Enter your wireless network or wireless router's

name.

Select your network type.

Network Type Wireless

Wireless network

si-ap

MIC

KIMING_VTOWER

You can connect your BD Home Theater to the internet. Please select which wireless network to use.

~	Enter numbers directly using the number
	buttons on your remote control.
~	Enter letters by selecting a letter with the
	▲▼◄► buttons, and then pressing the E
	button.
~	To display capital letters (or redisplay lower
	case letters if capital letters are displayed),
	select	, and then press the E button.

WPS(PBC) Search

m Move " Select ' Return

2.Select the desired network, and then press the E button.

3.On the Security Key screen, enter your network's security code or pass phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.

4.When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.

✎You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

Wireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 22)

1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.

2.Scroll through the list, select the desired network or Add Network, and then press the E button.

3.If you selected a network in Step 2, go to Step 6. If you selected Add Network, go to Step 4.

~ To display symbols and punctuation, select

123#&, and then press the E button. To

redisplay letters, select 123#&, and then press

the E button.

When finished, select Done, and then press the

Ebutton.

5.On the Security method screen that appears, use the ▲▼ buttons to select the network's Security method, and then press the E button. On the next screen, enter your network's security code or pass phrase.

~Enter numbers directly using the number buttons on your remote control.

~Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.

When finished, select Done, and then press the E button. The product searches for the network.

6.The Network connection fail screen appears. Use ◄► buttons to select IP Settings, and then press the E button.

7.Select the IP setting field, and then set it to Enter manually.

8.Select a network parameter to enter (IP Address, for example), and then press E button. Use the number keypad on your remote control to enter the numbers for the parameter. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a parameter. When done with one value, press the E button.

9.Press the ▲ or ▼ button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 8.

10.Repeat Steps 8 and 9 until you have filled in all parameters.

24 - English