Connections

Installing the Speakers on the Tallboy Stand

* HT-J5550W only

1.Turn the Stand Base upside-down and connect

it to the Stand.

1

Stand Base

2

 

2. Use the driver to fasten the screws (5x20) on the 4 marked holes.

3.￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿

4.Connect the upper Speaker to the assembled Stand.

5.Insert a screw (5x15) and fasten it clockwise through the hole on the rear of the speaker using a screwdriver.

6.￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

7.Connect the arranged speaker cables to the port on the speaker’s rear side while matching their colours.

8.This is the appearance after the speaker is installed.

Follow this steps to install other speaker.

Stand

34

Speaker

Stand

5

6

7

8

Or

Speaker Cable Connections

1.Match each speaker cable bundle to the correct speaker by matching the coloured band on each bundle to the coloured sticker on the bottom or back of each speaker.

2.Connect the speaker wire plugs from each speaker to the back of the product by matching the coloured band on each cable to the colours of the speaker jacks. When connecting, make sure to match label colour on the back of speaker.

10 - English