![](/images/new-backgrounds/1285301/28530153x1.webp)
Listening to Radio
You can listen to the chosen band (FM,AM broadcast stations) by using either the automatic or manual tuning operation.
Presetting Stations | GB | ||
|
|
| |
You can store up to: |
|
|
|
15 FM stations | • FM | Frequency Modulation |
|
15 AM stations | • AM | Frequency Modulation |
|
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1 Press TUNER button.
2 Tune in to the desired station.
1Press the TUNER button and select the FM band.
2 Press to select "89.10".
3 Press the TUNER MEMORY button.
•The selection toggles back and forth between "FM ➝ AM" each time the TUNER button is pressed.
Main Unit
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
When is pressed, a preset broadcast station is selected.
Press and hold to automatically search for active broadcasting stations.
Briefly press to increase or decrease the frequency incrementally.
•Each time the button is pressed, the band switches between "FM ➝ AM".
TITLE | CHAP PRGM RDS RT | ST TUNED |
kHz MHz
•Refer to Step 2 on page 51 to automatically or manually tune in to a station.
TITLE | RDS RT | ST TUNED |
kHz MHz
•“PRGM” flashes in the display.
TITLE | RDS RT | ST TUNED |
kHz MHz
Press the Function
1button to select the desired band (FM,AM).
2 Select a broadcast station.
Automatic Tuning 1 Press the STOP ( )
button to select
PRESET and then press button to select the preset station.
Automatic Tuning 2 Press the STOP ( ) button
to select "MANUAL" and
then press and hold button to automatically search the band.
Manual Tuning Press STOP ( ) to select MANUAL and then briefly
press to tune in to a lower or higher frequency.
4 Press ![](/images/new-backgrounds/1285301/28530153xi25.webp)
![](/images/new-backgrounds/1285301/28530153xi26.webp)
![](/images/new-backgrounds/1285301/28530153xi27.webp)
to select preset number.
•You can select between 1 and 15.
TITLE | RDS RT | ST TUNED |
|
| kHz |
|
| MHz |
5 |
| Press the TUNER | 6 |
| To preset another |
| MEMORY button |
| station, repeat | ||
|
| again. |
|
| steps 2 to 5. |
|
|
|
|
|
|
•Press the TUNER MEMORY button before ‘PRGM’ disappears from the display.
•‘PRGM’ disappears from the display and the station is stored in memory.
TITLE | CHAP | RDS RT | ST TUNED |
kHz MHz
RADIO OPERATION
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•In a poor reception area, select MONO for a clear,
To tune in to a preset station, press on the remote control to select a channel.
51 | 52 |