Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.
Presetting StationsYou can store up to:15 | FM stations | • FM | Frequency Modulation |
15 | AM stations | • AM | Medium Wave |
ENG
Remote Control Unit
Example: Presetting FM 89.1 in the memory1 Press TUNER button.
2 Tune in to the desired station.
1Press the TUNER button and select the FM band.
2 Press TUNING/CH
to select "89.10".
3 Press the TUNER MEMORY button.
•The selection toggles back and forth between "FM ➝ AM" each time the TUNER button is pressed.
Main Unit
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
When 
is pressed, a preset broadcast station is selected.
Press and hold TUNING/CH button to automatically search for active broadcasting stations.
Briefly press TUNING/CH button to increase or decrease the frequency incrementally.
•Each time the button is pressed, the band switches between "FM ➝ AM".
•Refer to Step 2 on page 59 to automatically or manually tune in to a station.
•“PRGM” flashes in the display.
Press the Function
1button to select the desired band (FM, AM).
2 Select a broadcast station.
Automatic Tuning 1 Press the STOP ( 
)
button to select
PRESET and then press 
button to select the preset station.
Automatic Tuning 2 Press the STOP ( 
) button
to select "MANUAL" and
then press and hold 
button to automatically search the band.
4 Press 
to select preset number.
•You can select between 1 and 15.
5 |
| Press the TUNER | 6 |
| To preset another |
| MEMORY button |
| station, repeat | ||
|
| again. |
|
| steps 2 to 5. |
|
|
|
|
|
|
•Press the TUNER MEMORY button before ‘PRGM’ disappears from the display.
•‘PRGM’ disappears from the display and the station is stored in memory.
RADIO
Manual Tuning Press STOP ( 
) to select MANUAL and then briefly
press 
to tune in to a lower or higher frequency.
Note | • Up to 15 stations (30 total ; 15FM, 15AM) can be saved in memory. |
| If you save more than 15 stations, the oldest station previously saved is removed |
| and a new station is stored in its place. |
OPERATION
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
59 | • Each time the button is pressed, the sound switches between "STEREO" and "MONO". | |
• In a poor reception area, select MONO for a clear, | ||
|
To tune in to a preset station, press remote control to select a channel.
on the
60
