Samsung HT-P38T/XAC, HT-P38TH/XAA manual FM antenna connection, AM antenna connection, Cooling Fan

Be sure to match connector colors.

Connect Video Out on the Home Theater to Video In on the TV.

1

2 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.

3 Connect Audio In on the Home Theater to Audio Out on the external analog component.

•

External Analog

Component

Optical Cable (not supplied)

External Digital

Component

Connecting External Components

Connecting an External Digital / Analog Component

Example: Digital signal components such as a Set-Top Box or CD Recorder. Analog signal components such as a VCR or TV.

Audio Cable

If the external analog component has only one

Audio Out, connect either left or right.

Connecting the FM and AM Antennas ENG

If AM reception is poor, connect an outdoor AM antenna(not supplied).

AM Loop Antenna	CONNECTIONS
(supplied)

FM Antenna (supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

4 Press AUX on the remote control to select ‘DIGITAL IN / AUX1 / AUX 2’.

•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.

•You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.

FM antenna connection

1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

AM antenna connection

1.Connect the AM loop antenna supplied to the AM and terminals.

2.If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

Note • If you have connected an external digital component and also an Analog component to Video In (1, 2) at the same time, there will be video from AUX 1 even when you select DIGITAL IN.

•If you have connected Audio In (L, R) to 1, connect Video In to 1 as well, and if you have connected Audio In (L, R) to 2, connect Video In to 2 also.

•When you select Aux 1 or 2, you are selecting Video 1 or 2 inputs respectively.

Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating.

Please observe the following cautions for your safety.

• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.

• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

17 18