ENG

26

OPERATION
To stop playback, press STOP during playback.
If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.
If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, “STOP” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
To resume playback, press PLAY/PAUSE ( ) button again.
The DVD/CD function is automatically selected when Disc Skip is pushed.

Selecting a Disc in the Disc changer

To select a specific disc, press the corresponding DIRECT PLAY
(1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on the
remote control, until the required disc indicator flashes.
If the disc selected is not loaded, the next disc is played automatically.

25

Disc Playback

2
Load a disc.
Place a disc gently into the tray with the disc’s label
facing up.
Depending on the content of the disc, the initial screen may appear different.
1
Press OPEN/CLOSE button to open the
disc tray.
3
Press DISC SKIP button.
Rotate the carousel tray so you can load the third, fourth,
and fifth discs.
4
Close the compartment by pressing the
OPEN/CLOSE button again.
DVD CD
Playback starts automatically.
Note
Q70(1~44)_XAA_ENG 2003.3.1 11:12 AM Page 28