Speaker Setup
Setting up Speaker Mode and Delay Time 
SPK Mode
1
Press the SPK Mode button.
2
Press the Left/Right (▲ | / | ▲) button to select |
the desired item. |
|
|
•Each time the button is pressed, a different mode selection is displayed on the front panel display as shown below.
S | Front speaker: Small |
| |
p |
| ||
|
| ||
e |
|
| |
a |
|
| |
k | Center speaker: Small | Center speaker: Not Used | |
e |
|
| |
r |
|
| |
M | Rear speaker: Small | Rear speaker: Not Used | |
o | |||
|
| ||
d |
|
| |
e | Subwoofer: Use |
| |
|
| ||
|
| Setting up Delay Time from 00~05ms | |
Delay | Center Speaker Delay Time |
| |
|
| ||
Time |
| Setting up Delay Time from 00~15ms | |
|
| ||
| Rear Speaker Delay Time |
|
•SMALL: When this setting is selected, low frequencies of below 200 Hz are assigned to the subwoofer only.
•USE: Select when using speakers.
•NONE: Select this when no speakers are installed.
The display changes depending on the current audio output mode (DSP, PRO LOGIC,
35
