Samsung HT-SK6 instruction manual Troubleshooting

Troubleshooting

Problem

Check

•Is the disc installed with the label side facing up?

The disc tray does not	• Is the power cord plugged securely into the power outlet?
open.
	• Turn off the power to the unit by pressing the Power (	) button
	and turn it back on.

	• Check the region number of the DVD.
Disc does not play.	• DVD discs purchased abroad may not be playable.
	• This player cannot play CD-ROMs, DVD-ROMs, etc.
	• Check the rating level of the DVD.
Playback does not start	• Check whether the disc has any scratch marks or is deformed.
immediately when the
Play/Pause button is pressed.
	• No sound is heard during high-speed playback, slow playback,
	and step motion playback modes.
No sound is produced.	• Are the speakers properly connected? Is the speaker Setup
	correctly customized?
	• Is the disc severely damaged?
	The disc may be dirty. Wipe off fingerprints or dirt.
Sound can be heard only	• When listening to a CD or radio, sound is output to the front
from a few speakers and	speakers only (L/R). Select the “PRO LOGIC” option by pressing
not all six.	the Pro Logic button on the remote control unit to use all six
	speakers.
	• Check whether your DVD disc is 5.1 CH compatible.
Picture does not appear; sound	• Was the player moved suddenly from a cold place to a warm one?
is not produced; the disc tray	When condensation forms inside the player, remove the disc
	and let the player stand for 1 or 2 hours with the power on.
opens 2-5 seconds later.
	(You can use the player after the condensation disappears.)
Sound quality is	• Are the speaker cables loose?
irregular.	• Is there any dirt or debris at the end of the speaker connector?
Dolby Digital 5.1 Channel	• Does the disc being played show the “Dolby Digital 5.1CH” mark ?
Surround Sound is not	5.1-channel sound is reproduced only if the disc is recorded with
being reproduced.	5.1 channel sound.
	• Is the DVD player connected to the proper speakers?

45