Connecting the Video Out to TV

GB

Choose one of the three methods for connecting to a TV.

METHOD 1

METHOD 2

METHOD 3

CONNECTIONS

METHOD 1 Composite Video ............... Good Quality

Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your television.

METHOD 2 Scart ............... Better Quality

If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the AV OUT jack on the back panel of the system to the SCART IN jack on your television.

VIDEO SELECT Function

Press and hold VIDEO SEL. button on the remote control for over 5 seconds.

"COMPOSITE" or "RGB" will appear in the display.

At this time, press the VIDEO SEL. button shortly to select between "COMPOSITE" and "RGB".

If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode. You can get a better picture quality by using Scart setting.

If Scart (RGB Input) is not equipped for your TV, press VIDEO SEL. button to select COMPOSITE mode.

METHOD 3 Component (Progressive Scan) Video ............... Best Quality

If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your television.

Note When the Progressive scan mode is selected, the VIDEO output (Yellow) and SCART output does not output any signal.

16