Disc Playback

GB

Note

•Depending on the content of the disc, the initial screen may appear different.

1 Press OPEN/CLOSE button to open the disc tray.

2 Load a disc.

•Place a disc gently into the tray with the disc’s label facing up.

3 Close the compartment by pressing the OPEN/CLOSE button again.

DVD VCD CD

OPERATION

 

• Playback starts automatically.

 

To stop playback, press STOP during playback.

•If pressed once, “PRESS PLAY” is displayed and the stop position will be

stored in memory. If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)

• If pressed twice, “STOP” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.

To temporarily pause playback, press PLAY/PAUSE during playback.

• To resume playback, press PLAY/PAUSE ( ) button again.

Selecting the Video Format

Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.

• By default, the video format is set to "PAL".

• "NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".

• Each country has a different video format standard.

• For normal playback, the video format of the disc must be the same as the video

format of your TV.

22