Connecting the Video Out to TV
Choose one of the three methods for connecting to a TV.
Connecting the HDMI IN/OUT | ENG |
|
HDMI
METHOD 1 |
(supplied) |
METHOD 2 
METHOD 3
TV
| COMPONENT | RADIO ANT |
| OUT |
|
| Y |
|
|
| FM 75§ |
| PB |
|
XM | WIRELESS | CONNECTIONS |
| PR |
TV | ||
DVD player | ||
|
METHOD 1 Composite Video ....... (Good Quality)
-Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your TV.
METHOD 2 Component ....... (Better Quality)
-If your television is equipped with Component Video inputs, connect a component video cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding jacks on your TV.
METHOD 3 HDMI ....... (Best Quality)
- Connect the HDMI out to the HDMI input on your TV.
Note | • This product operates in Progressive scan mode(480p Only ) for Component Output. |
| • If the TV only supports a resolution of 576i(480i), the screen may be divided into 2 screens, or dis- |
| play nothing. |
1 Connect the HDMI IN Port of this unit and the HDMI OUT Port of a
2 Connect the HDMI OUT Port of this unit and the HDMI IN Port of your TV.
3 Press AUX on the remote control to select ‘HDMI IN.
• Each time the button is pressed, the selection changes as follows: |
DIGITAL IN➝ AUX 1 ➝ AUX 2 ➝ HDMI IN. |
• You can also use the FUNCTION button on the main unit. |
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 ➝ HDMI IN ➝ USB ➝ FM. |
Note |
• When this unit is turned off, no HDMI video or audio signal is output from this unit. |
• In the HDMI IN Function, the video resolution switch button (SD/HD) does not work. |
• When the output from an external device, which is connected to this device, is DVI, no audio will be out- |
put. In this case, you can listen to the digital audio by connecting the Optical OUT of the source device |
and the Optical IN of this device, even if the source device and this device is connected through DVI |
interface. |
15 | 16 |
