Listening to Radio
Remote Control
1 Press the TUNER button to select the FM band. 2 Tune in to the desired station.
Automatic Tuning 1 : When the #,$ button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press the and hold .,, button to automatically search for active broadcasting stations.
Manual Tuning : Briefly press the .,, button to increase or decrease the frequency incrementally.
Main Unit
1 Press the FUNCTION button to select the FM band. 2 Select a broadcast station.
Automatic Tuning 1 : Press the STOP () button to select PRESET and then press the #,$ button to select the preset station.
Automatic Tuning 2 : Press the STOP () button to select <MANUAL> and then press the and hold #,$ button to automatically search the band.
Manual Tuning : Press the STOP () button to select <MANUAL> and
then briefly press the #,$ button to tune in to a lower or higher frequency.
d Press the MO/ST button to listen in Mono/Stereo. (This applies only when listening to an FM station.)
Each time the button is pressed, the sound switches between <STEREO> and <MONO>.
In a poor reception area, select <MONO> for a clear,
GB
Presetting Stations
Example : Presetting FM 89.10 in the memory
1 Press the TUNER button to select the FM band. 2 Press the .,, button to select <89.10>.
3 Press the TUNER MEMORY button.
<PRGM> flashes in the display.
4 Press the #,$ button to select preset number.
You can select between 1 and 15 presets.
5 Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before <PRGM> disappears from the display.
<PRGM> disappears from the display and the station is stored in memory.
6 To preset another station, repeat steps 2 to 5.
d To tune in to a preset station, press the #,$ button on the remote control to select a channel.
• This unit does not receive AM broadcasts.
MISCELLANEOUS
54 | 55 |
