Speaker Installation
How to Install the Speaker and the Stand
1STAND1 Turn the stand upside down and mount it on the stand
BASE | base. |
| |
| STAND |
2 | 2 Tighten 4(Black) screws on the bottom side of the stand base. |
3 | 3 Place the stand on the floor and tighten 2(Silver) on the back of |
| the stand. |
Speaker Packages
Please confirm that all the following contents are included in the package.
Front/Rear Speaker
Center Speaker
SPEAKER | STAND | STAND BASE | Screw (16EA) : BLACK | Subwoofer Speaker | Speaker Cable (5EA) |
(4EA) | (4EA) | (4EA) | Screw (16EA) : SILVER |
Front speakers and rear speakers are packaged separately as shown in the diagram.
4 | 4 Mount the speaker on the stand. |
| SPEAKER |
STAND
5 | 5 Tighten 2(Silver) screws on the back of the speaker. |
|
6 | 6 This is the successfully assembled speaker. |
|
• Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.
GB
CONNECTIONS12 | 13 |