Installing the DVD player
STAND
1
1 Mount the stand on the stand base and tighten 4
GB
5 |
5 Open the holder cover of the round board on the |
STAND BASE
2
screws on the bottom side of the stand base.
bottom of the stand and pass the cables through the |
|
holder. |
|
6 Squeeze the cables into the groove on the holder of | CONNECTIONS |
|
6
the round board.
| 2 Secure the main unit by aligning 2 protruding points |
| on the back of the main unit with the fixing holes |
STAND | on the stand. |
3 | 3 Tighten 3 screws in the middle of the stand. |
|
4 | 4 Push the cable into the cable fixing hole in the stand. |
Round Table
Holder
7 Close the holder cover.
7
| 8 Open a Toroidal Ferrite Core by pulling it upward. |
8 | Wrap it around of the system connection cable so it |
will be next to the DVD Player. Close it back by | |
| pressing it all the way down until you hear a clicking |
| sound. |
• For the stand packages, refer to page 9.
• The Toroidal Ferrite Core is designed to reduce electromagnetic waves that may cause interference.
14 | 15 |