connections

Front/rear Tallboy Stand

How to Install the Speaker on the Stand

1.Turn the STAND upside-down and connect it to the STAND BASE.

. Insert two small SCrEWS into the two holes marked with arrows using a screwdriver as shown in the illustration.

(HT-TZ215 : 2EA, HT-TZ315 : 3EA)

. Insert a large SCrEW into the hole on the rear of the Speaker STAND.

4.Connect the assembled stand to the SPEAKEr.

1

STAND

BASE

STAND





4

SPEAKER

STAND

. Insert another large SCrEW into the hole on





the rear of the speaker using a screwdriver

 

 

as shown in the illustration.

 

 

. This is the successfully assembled speaker. Make sure that the speaker is installed on a fl at and stable area. Otherwise it may be easily knocked over.

M ` The speaker system may vary, depending on the model. Please check your speaker system to see if it includes the correct package of "Front/rear & Center Speakers" corresponding to your model.

How to Install the Speaker on the Stand Base

1.Connect the SPEAKEr with the

STAND BASE.

. Insert the SCrEW into the hole on the rear of the speaker using a screwdriver as shown in the illustration.

. This is the SPEAKEr successfully assembled with the Stand Base.

1

SPEAKER

STAND

BASE



M ` The speaker system may vary, depending on the model. Please check your speaker system to see if it includes the correct package of "Front/rear & Center Speakers" corresponding to your model.

0