DVD Playback Mode (HT-Z310/TZ312/TZ315 only)

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.

To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.

1.Press the MENU button while the disc tray is open.

. Press the Cursor % button to move to Setup and then press the ENTER button.

. Press the Cursor % button to move to DVD TYPE and then press the ENTER button.

4.Press the Cursor $,% button to move to DVD VIDEO and then press the ENTER button.

~Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.

~DVD VIDEO : Set to play the DVD video contents contained on a DVD audio disc.

~DVD AUDIO : Set to play the default DVD audio.

MOVE ENTER RETURN EXIT

MOVE ENTER RETURN EXIT

M ` DVD Play mode is set to DVD Audio as factory default setting.

`Powering off the main unit will automatically switch to the DVD Audio mode.

DviX (R) Registration

Please use the Registration code to register this player with the DivX (R) video on demand format. To learn more, go to www.divx.com/vod.

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.

ENG

system ●setup

1.In Stop mode, press the MENU button.

. Press the Cursor % button to move to Audio and then press the ENTER button.

. In the SPEAKER SETUP, press the ENTER button again.

4.Press the Cursor ,,,button to move to the desired speaker and then press the ENTER button.

~For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows : SMALL ➞ NONE.

~For L and R, the mode is set to SMALL.

~SMALL : Select this when using the speakers.

~NONE : Select this when no speaker is connected.

dPress the RETURN button to return to the previous level.

dPress the EXIT button to exit the setup screen.

MOVE ENTER RETURN EXIT

MOVE CHANGE RETURN EXIT

M ` Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 60).

55