Listening to Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.

Presetting Stations

You can store up to:

15

FM stations

FM

Frequency Modulation

15

AM stations

AM

Medium Wave

ENG

Remote Control Unit

Example: Presetting FM 89.1 in the memory

1 Press TUNER button.

2 Tune in to the desired station.

1Press the TUNER button and select the FM band.

2Press TUNING/CH

to select "89.10".

3 Press the TUNER MEMORY button.

The selection toggles back and forth between "FM AM" each time the TUNER button is pressed.

Main Unit

Automatic Tuning 1

Automatic Tuning 2

Manual Tuning

When is pressed, a preset broadcast station is selected.

Press and hold TUNING/CH to automatically search for active broadcasting stations.

Briefly press TUNING/CH to increase or decrease the frequency incrementally.

Each time the button is pressed, the band switches between "FM AM".

Refer to Step 2 on page 63 to automatically or manually tune in to a station.

“PRGM” flashes in the display.

Press the Function

1button to select the desired band (FM, AM).

2 Select a broadcast station.

Automatic Tuning 1 Press the STOP ( )

button to select

PRESET and then press button to select the preset station.

Automatic Tuning 2 Press the STOP ( ) button

to select "MANUAL" and

then press and hold button to automatically search the band.

4 Press to select preset number.

You can select between 1 and 15.

5

Press the TUNER

6

To preset another

MEMORY button

station, repeat

 

again.

 

steps 2 to 5.

Press the TUNER MEMORY button before ‘PRGM’ disappears from the display.

‘PRGM’ disappears from the display and the station is stored in memory.

RADIO

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

press to tune in to a lower or higher frequency.

Note

Up to 15 stations (30 total ; 15FM, 15AM) can be saved in memory.

 

If you save more than 15 stations, the oldest station previously saved is removed and a

 

new station is stored in its place.

OPERATION

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

63

Each time the button is pressed, the sound switches between "STEREO" and "MONO".

In a poor reception area, select MONO for a clear, interference-free broadcast.

 

To tune in to a preset station, press remote control to select a channel.

on the

64

Page 33
Image 33
Samsung HT-WP38 Listening to Radio, Remote Control Unit, Tune in to the desired station, 2Press TUNING/CH, Main Unit