Samsung HT-WP38 Disc Playback, Press OPEN/CLOSE button to open the disc tray Load a disc

Disc Playback

1 Press OPEN/CLOSE button to open the disc tray.

2 Load a disc.

• Place a disc gently into the tray with the disc’s label facing up.

3 Press DISC SKIP button.

• Rotate the carousel tray so you can load the third, fourth, and fifth discs.

4 Close the compartment by pressing the OPEN/CLOSE button again.

DVD CD

• Playback starts automatically.

Note	•	Depending on the content of the disc, the initial screen may appear different.
	• Depending on the recording mode, some MP3-CDs cannot be played.
	• Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc.

Selecting a Disc in the Disc changer

The DVD/CD function is automatically selected when Disc Skip is pushed.

To select a specific disc, press the corresponding DIRECT PLAY (1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on the remote control, until the required disc indicator flashes.

•If the disc selected is not loaded, the next disc is played automatically.

To stop playback, press STOP during playback.

•If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.

If PLAY/PAUSE ( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)

•If pressed twice, “STOP” is displayed, and if PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.

To temporarily pause playback, press PLAY/PAUSE during playback.

• To resume playback, press PLAY/PAUSE ( ) button again.

ENG

OPERATION

23 24