Playing Media Files using the USB Host Feature
You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel Home Theater sound by connecting the storage device to the USB port of the Home Theater.
1 Connect the USB device to the USB port on the front of the unit.
2 Press the FUNCTION button on the DVD Player or the USB button on the remote control to select the USB mode.
■<USB> appears on the display screen and then disappears.
■The USB MENU screen appears on the TV screen and the saved file is played.
3 To stop playback, press the STOP ( ) button.
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable.
(1)Press the STOP ( ) button twice in a row. The display will show REMOVE USB.
(2)Remove the USB cable.
•To listen to your music files with 5.1 channel home theater sound, you must set the Dolby Pro Logic II mode to Matrix. (See page 52)
Skip Forward/Back
During playback, press the button.
■When there is more than one file and you press the button, the next file is selected.
■ When there is more than one file and you press the button, the previous file is selected.
Fast Playback
To play back the disc at a faster speed, press the button during playback.
■ Each time you press either button, the playback speed will change as follows: 2x ➝ 4x ➝ 8x ➝ 32x ➝ Normal.
Compatible Devices
1.USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc in Windows (2000 or later) without additional driver installation.)
2.MP3 Player: HDD and flash type MP3 players.
3.Digital camera: Cameras that support USB Mass Storage v1.0.
•Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
4.USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
•You may experience a difference in playback quality when you connect a USB1.1 device.
•For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5.USB card Reader: One slot USB card reader and Multi slot USB card reader.
•Depending on the manufacturer. the USB card reader may not be supported.
•If you install multiple memory devices into a multi card reader, you may experience problems.
6.If you use a USB extension cable, the USB device might not be recognized.
Supported Formats
| File name | File | Bit rate | Version | Pixel | Sampling | |
| extension | Frequency | |||||
|
|
|
|
| |||
Still Picture | JPG | JPG .JPEG | – | – | 640x480 | – | |
Music | MP3 | .MP3 | 80~384kbps | – | – | 44.1kHz | |
|
|
|
|
|
| ||
WMA | .WMA | 56~128kbps | V8 | – | 44.1kHz | ||
| |||||||
| VCD | MPG.MPEG .DAT | 1.5Mbps | VCD1.1,VCD2.0 | 320x480 | 44.1KHz | |
Movie |
|
|
|
|
|
| |
WMV | .WMV | 4Mbps | V1,V2,V3,V7 | 720x480 | 44.1KHz~48KHz | ||
|
|
|
|
|
|
| |
| DivX | .AVI,.ASF | 4Mbps | DivX3.11~DivX5.1,XviD | 720x480 | 44.1KHz~48KHz | |
|
|
|
|
|
|
|
•CBI (Control/Bulk/Interrupt) is not supported.
•Digital Cameras that use PTP protocol or require additional program installation when connected to a PC are not supported.
•A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file system is supported.)
•Some MP3 players, when connected to this product, may not operate depending on the sector size of their file system.
•The USB host function is not supported if a product that transfers media files by its manufacturer- specific program is connected.
•Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
•The USB host function of this product does not support all USB devices. For information on the supported devices, see page 63.
ENG
OPERATION
40 | 41 |