HOW TO INSTALL AND REMOVE O-RING

To Install O-ring:

Step 1: O-ring and O-ring groove must be completely clean before installing O-ring.

Step 2: Push O-ring into groove as shown being careful not to twist or roll O-ring.

Step 3: Use two fingers to push last part of O-ring into groove.

Step 4: Carefully close housing to firmly seat O-ring and

 

open housing again to inspect that O-ring is completely

 

seated into groove. Do NOT grease the O-ring.

EN-95

 

Page 95
Image 95
Pioneer DC500 manual HOW to Install and Remove O-RING